Kärnenergi - Referensstrålning av betapartiklar - Del 3: Kalibrering av områdes- och persondosimetrar samt bestämning av deras respons som funktion av betaenergi och infallsvinkel (ISO 6980-3:2006, IDT)
Kärnenergi - Referensstrålning av betapartiklar - Del 3: Kalibrering av områdes- och persondosimetrar samt bestämning av deras respons som funktion av betaenergi och infallsvinkel (ISO 6980-3:2006, IDT)
Prenumerera på standarder med tjänst SIS Abonnemang. Genom att prenumerera får du effektiv åtkomst till gällande standarder och säkerställer att ditt företag alltid har tillgång till senaste utgåvan.
Läs mer om SIS Abonnemang
This part of ISO 6980 describes procedures for calibrating and determining the response of dosemeters and doserate meters in terms of the International Commission on Radiation Units and Measurements (ICRU) operational quantities for radiation protection purposes. However, as noted in ICRU Report 56, the ambient dose equivalent, H*(10), used for area monitoring of strongly penetrating radiation, is not an appropriate quantity for any beta radiation, even that which penetrates 10 mm of tissue (Emax > 2 MeV). For beta particles, the calibration and the determination of the response of dosemeters and doserate meters is essentially a three-step process. First, the basic field quantity, absorbed dose to tissue at a depth of 0,07 mm in a tissue-equivalent slab geometry is measured at the point of test, using methods described in ISO 6980-2. Then, the appropriate operational quantity is derived by the application of a conversion coefficient that relates the quantity measured (reference absorbed dose) to the selected operational quantity for the selected irradiation geometry. Finally, the reference point of the device under test is placed at the point of test for the calibration and determination of the response of the dosemeter. Depending on the type of dosemeter under test, the irradiation is either carried out on a phantom or free-in-air for personal and area dosemeters respectively. For individual and area monitoring, this part of ISO 6980 describes the methods and the conversion coefficients to be used for the determination of the response of dosemeters and doserate meters in terms of the ICRU operational quantities directional dose equivalent, H'(0,07;?) and personal dose equivalent, Hp(0,07). This part of ISO 6980 is a guide for those who calibrate protection-level dosemeters and doserate meters with beta-reference radiation and determine their response as a function of beta-particle energy and angle of incidence.
Kärnenergi - Referensstrålning av betapartiklar - Del 3: Kalibrering av områdes- och persondosimetrar samt bestämning av deras respons som funktion av betaenergi och infallsvinkel (ISO 6980-3:2006, IDT)
Prenumerera på standarder med tjänst SIS Abonnemang. Genom att prenumerera får du effektiv åtkomst till gällande standarder och säkerställer att ditt företag alltid har tillgång till senaste utgåvan.
Läs mer om SIS Abonnemang
Internationell titel: Nuclear energy - Reference beta-particle radiation - Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence (ISO 6980-3:2006, IDT)